---
title: "IAME X30 data analysis – Slicks"
description: "Read an IAME X30 session on iPhone, iPad or Mac: how close the peak RPM got to the limiter, exhaust and water against the window, and your carb notes."
url: "https://slicks.app/use-cases/iame-x30-data-analysis"
updated: "2026-11-12"
---

[Use cases](https://slicks.app/use-cases)

For IAME X30

# How close your X30 ran to its limiter

An X30 lives near the top of its rev range. Slicks shows how close the session's peak got, where on the track it happened, and whether exhaust and water stayed inside their window.

[![Download on the App Store](https://slicks.app/app-store-badge.svg)](https://apps.apple.com/ca/app/slicks/id6746713889?mt=12)[![Download on the App Store](https://slicks.app/app-store-badge.svg)](https://apps.apple.com/ca/app/slicks/id6746713889)

Free for iPhone, iPad and Mac

![iPhone Duo open flat on one lap: its line on the satellite map in the colours of its speed, beside its sector times and its speed and lateral g against distance.](https://slicks.app/hero/duo-1080.webp)

Pick IAME X30 in Slicks and every session from your MyChron or other AiM logger is checked against the window the karting community quotes for the engine: 15,500–16,000 rpm, 580–650 °C exhaust and 50–58 °C water. You see the peaks in plain words, where on the lap they happened, and the carb settings you ran beside them.

## The X30 in brief

The X30 is IAME's 125 cc two-stroke: water-cooled, reed-valve inlet, electric starter and a centrifugal dry clutch, with no power valve and a Tillotson HW-27A diaphragm carburettor. IAME's own sheet gives it a rev limit of 16,000 rpm. It is raced in Senior and Junior form, the Junior restricted, in national championships and in IAME's own series.

Two things follow from that for the data. The engine runs right up against a hard limit, so peak RPM is a sharper question than on an engine without one. And the carb has two needles and a pop-off pressure rather than a main jet, so what you write down after each session is a little more involved.

## The X30 window, row by row

| Reading       | Window Slicks checks | What a peak outside it usually points to                  |
| ------------- | -------------------- | --------------------------------------------------------- |
| Peak RPM      | 15,500–16,000        | Under 15,500: gearing too tall. At 16,000: on the limiter |
| Exhaust (EGT) | 580–650 °C           | Over 650: lean. Under 580: rich                           |
| Water         | 50–58 °C             | Too much or too little radiator covered                   |

These are the ranges commonly quoted for the X30 Senior, not IAME specifications, and your tuner's numbers win. Slicks has no custom windows, so if your tuner's range is different, read the number against theirs.

## Why the window stops at the limiter

The top of the RPM window is the limiter itself. A peak that reads 16,000 does not mean the gearing is perfect; it means the engine reached the limiter somewhere, and on the limiter the kart stops accelerating.

To find out how long it sat there, open the fastest lap and read its RPM chart along the longest straight. A trace that rises to 16,000 just as you brake is gearing doing its job. A trace that flattens at 16,000 for the last stretch of the straight is time given away, and the cure is usually a tooth off the rear sprocket.

Then check the laps in the draft. In a heat, a lap tucked behind another kart reaches the limiter sooner than a lap on your own. Pick the two and compare them: both RPM traces on one distance axis, with the gap between the laps drawn along the lap. If only the drafted laps touch the limiter, decide which straight you will race on before you change anything. The method for choosing the sprocket is on our page about [kart gearing data](https://slicks.app/use-cases/kart-gearing-data).

## Exhaust temperature and the HW-27A

The exhaust peak against 580–650 °C is the first check, but the shape along the straight tells an X30 tuner more. Colour the map by EGT, then open the lap and scrub along its EGT chart with RPM and speed above it, so you can see where on the lap the temperature climbs and where it peaks. What that shape should look like on your engine is your engine builder's call; bring them the chart rather than a single number.

The needles are the controls. As a rule of thumb, the high-speed needle has the most effect at the top of the rev range, where the exhaust peak is, and the low-speed needle more off the slow corners. Write both, in turns out, and the pop-off into the carb field when Slicks asks what changed. Put the air temperature in the session's notes, because Slicks does not record the weather and the settings follow it.

More on reading both temperature traces is on the page about [EGT and water temperature](https://slicks.app/use-cases/kart-egt-and-water-temperature).

## After a heat

| You see                              | It may mean               | Worth talking to your tuner about |
| ------------------------------------ | ------------------------- | --------------------------------- |
| RPM flat at 16,000 down the straight | Geared short              | A tooth off the rear              |
| Peak RPM around 15,200               | Geared tall               | A tooth on the rear               |
| EGT peak over 650 °C                 | Lean                      | Richening the high-speed needle   |
| Water peak over 58 °C                | Too much radiator covered | Less tape                         |

Change one of those at a time, then look at the lap: the theoretical best against the best lap, and the first corner on the Time Loss page. On an iPad or Mac, the lap screen charts every reading against one distance axis, with the map and the cursor moving together, and playback at up to four times real speed.

What Slicks does not do for an X30: it has no separate preset for the Junior, no custom windows, no needle calculator or weather input, and no engine-hours counter for rebuilds.

## Slicks at a glance

- **Files:** XRK and XRZ, as AiM loggers write them, parsed on the device
- **Devices:** iPhone, iPad and Mac, one app, one library
- **Requires:** iOS 26.6, iPadOS 26.6 or macOS 26.4
- **Price:** Free on the App Store
- **Sync:** Every device you sign in on; the summary works offline

Updated 12 November 2026

## What Slicks shows

_Figure: Engine speed round lap 8 at Adria Kart, standing on the track as a fence as tall as the revs, peaking at 14,114 rpm._

### Engine

Peak RPM, exhaust and water temperatures against your engine’s window.

_Figure: 9 laps of Adria Kart coiled one above the next in the order they were driven, each with its time, the fastest lap 8 at 49.765._

### Laps

Every lap in the order you drove it, the fastest marked, any two raced against each other.

_Figure: Adria Kart from above in three sectors, each in turn lifted out of the track with its time and its speed line drawn on it._

### Sectors

Every lap split into sectors against the session’s best, and the theoretical best they add up to.

## Questions

### Is the 15,500 to 16,000 rpm window an IAME figure?

No. It is the range the karting community quotes for an X30 Senior. IAME's own sheet gives the engine's rev limit as 16,000 rpm, which is why the window stops there. Your tuner's numbers win.

### I run an X30 Junior. Does the X30 preset fit?

Not exactly. The preset's numbers are the ones quoted for the Senior, and a restricted Junior engine may not reach them. Everything else in Slicks works the same; read the peaks against your tuner's figures.

### Can I see where on the track I hit the limiter?

Yes. Colour the track map by RPM and the end of each straight where the engine reached the top shows in the hottest colour. Hold the map at a point to read the exact RPM there.

### Can I record my needle settings and pop-off?

Yes. When you import a new session, tick carb under what changed and write the settings in the carb field, in whatever form your tuner uses. They stay on the session's Setup page next to the exhaust peak.

### Does Slicks read the X30's engine hours?

No. Slicks reads the data your AiM logger recorded, and it has no engine-hours counter for planning a top-end or bottom-end rebuild.

## Read next

[Everything Slicks is for](https://slicks.app/use-cases)

- [Rotax Senior MAXCheck a Rotax Senior MAX session on iPhone, iPad or Mac: peak RPM, exhaust and water temperature against the window, then the corners that cost time.](https://slicks.app/use-cases/rotax-max-data-analysis)
- [IAME KA100Read an IAME KA100 session on iPhone, iPad or Mac: exhaust temperature against a 580–650 °C window, the RPM trace, and the corners that cost you time.](https://slicks.app/use-cases/iame-ka100-data-analysis)
- [Kart gearing dataChoose a kart sprocket from the peak RPM at the end of the longest straight: see where it happened, log the teeth, and check the change worked.](https://slicks.app/use-cases/kart-gearing-data)
- [EGT and water temperatureSee your kart's exhaust and water temperature peaks against the engine's window, colour the track by EGT, and log carb and radiator changes.](https://slicks.app/use-cases/kart-egt-and-water-temperature)

![The Slicks app icon](https://slicks.app/app-icon.webp)

## Bring a session file

Download it and open one of your XRK files: your laps draw themselves the same way, on the tracks you race.

[![Download on the App Store](https://slicks.app/app-store-badge-white.svg)](https://apps.apple.com/ca/app/slicks/id6746713889?mt=12)[![Download on the App Store](https://slicks.app/app-store-badge-white.svg)](https://apps.apple.com/ca/app/slicks/id6746713889)[hello@slicks.app](mailto:hello@slicks.app)

_Figure: South Garda Karting drawn from the catalog's centreline as an empty track with a north arrow marked and no lap on it._
