---
title: "Kart data analysis for engine tuners and mechanics – Slicks"
description: "Peak RPM, EGT and water temperature against the window after every session, every channel's range, and the setup that ran beside them. From AiM files."
url: "https://slicks.app/use-cases/kart-tuner-data-analysis"
updated: "2026-11-12"
---

[Use cases](https://slicks.app/use-cases)

For tuners and mechanics

# Was the engine happy, and what did we change?

The two questions a tuner asks when the kart rolls in. Slicks puts the engine's peaks, every channel's range and the setup that ran on one page, from the driver's MyChron file or a link they send.

[![Download on the App Store](https://slicks.app/app-store-badge.svg)](https://apps.apple.com/ca/app/slicks/id6746713889?mt=12)[![Download on the App Store](https://slicks.app/app-store-badge.svg)](https://apps.apple.com/ca/app/slicks/id6746713889)

Free for iPhone, iPad and Mac

![Slicks on an iPhone showing a kart session: its fastest lap drawn on a map of the track in the colours of its speed, the lap time, and the session's laps underneath.](https://slicks.app/hero/phone-640.webp)

Slicks shows an engine tuner what each session did to the engine within a minute of the kart coming in: peak RPM, exhaust gas temperature and water temperature against the window for that engine, the lowest and highest reading of every channel the logger recorded, and the setup the driver wrote down, on one page. It reads AiM and MyChron XRK files on an iPhone, iPad or Mac.

## The Setup page, after every session

Open a session and go to **Setup**. From top to bottom:

1. **The engine's peaks against the window.** Peak RPM, peak EGT and peak water temperature, each marked in plain words as well as colour, so whether each one sat inside its window takes a glance on a phone screen.
2. **Every channel's range.** The minimum and maximum of everything the logger recorded.
3. **The kart.** Whatever was written down at import: gearing as front and rear teeth, cold pressures on all four tires, the tire set and whether it was new, the carb, and which of gearing, pressures, carb, axle, track width or caster changed.

That order is the order most tuners think in. The engine first, then whether the sensors told the truth, then what was different this time.

## The windows Slicks checks against

You pick the engine once, in Pits on the phone or Settings on the Mac. These are the ranges the karting community quotes, not manufacturer specifications, and your own numbers for your engine and your track always win.

| Engine        | Peak RPM      | EGT        | Water             |
| ------------- | ------------- | ---------- | ----------------- |
| Rotax Senior  | 13,500–14,500 | 550–650 °C | 55–60 °C          |
| IAME X30      | 15,500–16,000 | 580–650 °C | 50–58 °C          |
| IAME KA100    | none          | 580–650 °C | none              |
| Vortex Rok GP | none          | 450–650 °C | 48–60 °C          |
| Yamaha KT100  | none          | 500–600 °C | none (air-cooled) |

Where a preset has no window, the reading is shown with no verdict. Temperatures switch to °F in the units setting if that is what your notes are in.

## Reading the channel ranges

The min–max list is where a bad sensor gives itself away before it costs you a decision. A few things worth a look every time:

- **A range of zero, or close to it.** An EGT that sat at one value all session is a lead or a probe, not a perfectly steady engine.
- **A minimum that makes no sense.** A water temperature that drops to ambient mid-session, or an RPM channel with spikes far beyond anything the engine can turn, points at the wiring.
- **A maximum that moved and nothing explains it.** If the setup log says nothing changed, look at the conditions and the driver before the carb.

Only once the ranges look believable are the peaks worth acting on.

## The setup log next to the peaks

The point of having the setup on the same page is cause and effect. Went up a tooth on the rear sprocket? The peak RPM that came with it is right above. Leaned the carb? The EGT peak is there to say what it did.

Slicks asks for the change at import, before it shows a lap time, so the log is written before anyone has a reason to remember it differently. The gearing method itself, how to read where the RPM peaks on the longest straight and what a tooth is worth, is on [choosing gearing from kart data](https://slicks.app/use-cases/kart-gearing-data). The temperature side, reading exhaust and water and what to change, is in [kart EGT and water temperature](https://slicks.app/use-cases/kart-egt-and-water-temperature).

## When the peak needs a place on the track

A peak tells you how high; it does not tell you where. For that, tap a lap. The lap screen charts every reading the map can be coloured by against one distance axis, RPM and the temperatures included, with one cursor across every chart and the map. Colour the track map by RPM or EGT and the hottest or highest stretch shows up on the circuit itself; hold the map to read the exact value at a point.

On a Mac, the **Channels** tab lists every channel with a sparkline, and charts the one you pick over time or distance with a hover cursor and zoom. It is the closest Slicks gets to a tuner's bench.

## Reading a driver's shared link

Most tuners look after more than one kart, and most of those karts are not in the same pit. A driver can send you a link from the session's Share menu. It opens as a read-only page in any browser, with no app or account: the engine's peaks, the setup, the notes, the best lap, sectors and consistency. It is enough to answer "is it safe to go out again as it is?" from the other end of the paddock. The driver can stop sharing at any time, and the link never hands out the original file.

When you need the channels along the lap, ask for **Send File** instead and open the XRK in your own copy of Slicks.

What Slicks does not do for tuners: no custom engine windows, no math channels, no CSV export, no engine-hour tracking, and no overlaying one session's EGT on another's. It does not configure or download the logger; that stays with AiM's software.

## Slicks at a glance

- **Files:** XRK and XRZ, as AiM loggers write them, parsed on the device
- **Devices:** iPhone, iPad and Mac, one app, one library
- **Requires:** iOS 26.6, iPadOS 26.6 or macOS 26.4
- **Price:** Free on the App Store
- **Sync:** Every device you sign in on; the summary works offline

Updated 12 November 2026

## What Slicks shows

_Figure: Engine speed round lap 8 at Adria Kart, standing on the track as a fence as tall as the revs, peaking at 14,114 rpm._

### Engine

Peak RPM, exhaust and water temperatures against your engine’s window.

_Figure: 9 laps of Adria Kart coiled one above the next in the order they were driven, each with its time, the fastest lap 8 at 49.765._

### Laps

Every lap in the order you drove it, the fastest marked, any two raced against each other.

## Questions

### Can I set my own engine windows?

No. Slicks checks against a preset for the engine you pick: Rotax Senior, IAME X30, IAME KA100, Vortex Rok GP or Yamaha KT100\. Where your numbers differ, read the peak readings themselves; your own numbers win over the preset.

### Does Slicks track engine hours?

No. Slicks reads what each session recorded. It does not keep a running count of hours on an engine or remind you of a rebuild.

### Can I see where on the lap the RPM peaked?

Yes. Colour the track map by RPM or any temperature the logger recorded (on the Mac, by any channel at all), and hold a finger on the map to read the exact value at a point. The lap screen also charts RPM and the temperatures along the lap.

### Can I compare EGT from this session with the last one?

Not on one chart. Slicks compares two laps within the same session file. To compare sessions, open each one's Setup page and read the peaks side by side, with the setup that ran next to each.

### What if a driver sends me only a link?

The link opens in a browser without the app and shows the engine's peaks, the kart's setup, the notes, the best lap, sectors and consistency. For the channels along the lap you need the file itself, which the driver can send from the same Share menu.

## Read next

[Everything Slicks is for](https://slicks.app/use-cases)

- [Kart gearing dataChoose a kart sprocket from the peak RPM at the end of the longest straight: see where it happened, log the teeth, and check the change worked.](https://slicks.app/use-cases/kart-gearing-data)
- [EGT and water temperatureSee your kart's exhaust and water temperature peaks against the engine's window, colour the track by EGT, and log carb and radiator changes.](https://slicks.app/use-cases/kart-egt-and-water-temperature)
- [Kart setup logLog gearing, cold pressures, tires and carb with each MyChron session, written down before you see the lap times, and read next to what they did.](https://slicks.app/use-cases/kart-setup-log)
- [Rotax Senior MAXCheck a Rotax Senior MAX session on iPhone, iPad or Mac: peak RPM, exhaust and water temperature against the window, then the corners that cost time.](https://slicks.app/use-cases/rotax-max-data-analysis)

![The Slicks app icon](https://slicks.app/app-icon.webp)

## Bring a session file

Download it and open one of your XRK files: your laps draw themselves the same way, on the tracks you race.

[![Download on the App Store](https://slicks.app/app-store-badge-white.svg)](https://apps.apple.com/ca/app/slicks/id6746713889?mt=12)[![Download on the App Store](https://slicks.app/app-store-badge-white.svg)](https://apps.apple.com/ca/app/slicks/id6746713889)[hello@slicks.app](mailto:hello@slicks.app)

_Figure: South Garda Karting drawn from the catalog's centreline as an empty track with a north arrow marked and no lap on it._
