---
title: "Rotax Senior MAX data analysis – Slicks"
description: "Check a Rotax Senior MAX session on iPhone, iPad or Mac: peak RPM, exhaust and water temperature against the window, then the corners that cost time."
url: "https://slicks.app/use-cases/rotax-max-data-analysis"
updated: "2026-11-12"
---

[Use cases](https://slicks.app/use-cases)

For Rotax Senior MAX

# What your Rotax tells you after a session

Rotax Senior is the engine Slicks starts with. Bring a session in from your MyChron and the RPM, exhaust and water peaks are already checked against a window, with the lap time beside them.

[![Download on the App Store](https://slicks.app/app-store-badge.svg)](https://apps.apple.com/ca/app/slicks/id6746713889?mt=12)[![Download on the App Store](https://slicks.app/app-store-badge.svg)](https://apps.apple.com/ca/app/slicks/id6746713889)

Free for iPhone, iPad and Mac

![Slicks on an iPhone showing a kart session: its fastest lap drawn on a map of the track in the colours of its speed, the lap time, and the session's laps underneath.](https://slicks.app/hero/phone-640.webp)

Slicks reads a Rotax Senior MAX session from your MyChron or other AiM logger and checks the engine's peaks against the window the karting community quotes for it: 13,500–14,500 rpm, 550–650 °C exhaust and 55–60 °C water. Rotax Senior is the default preset, so a fresh install is already set up for you.

## The Senior MAX and how it is raced

The Rotax 125 MAX evo is a 125 cc two-stroke, water-cooled, with reed-valve induction, an electronically timed exhaust valve, a water pump built into the engine, an electric starter and a Dell'Orto VHSB 34 carburettor. The same family covers Micro MAX, Mini MAX, Junior MAX, Senior MAX, the Masters classes and DD2, the two-speed gearbox version, and it is raced worldwide in the Rotax MAX Challenge and its national series.

The engine is tightly controlled in most Rotax racing, so a Senior team has few engine settings to play with on the day: the main jet, the gearing and how much radiator is covered. Those three show up directly in the three readings Slicks checks, and the rest of the gap to the front is in the chassis and the driving.

## The window Slicks checks a Rotax against

| Reading       | Window        | Below it, usually              | Above it, usually                          |
| ------------- | ------------- | ------------------------------ | ------------------------------------------ |
| Peak RPM      | 13,500–14,500 | Gearing too tall for the track | Gearing too short, or a lap in the draft   |
| Exhaust (EGT) | 550–650 °C    | Running rich                   | Running lean; a bigger main jet richens it |
| Water         | 55–60 °C      | Too much radiator open         | Too much radiator covered                  |

These are the ranges commonly quoted for the Senior, not figures from Rotax, and your tuner's own numbers win. The Setup page says where each peak sat in plain words as well as in colour. Readings in °F are a setting in Pits.

The water window is the narrowest of any preset Slicks has: five degrees. A morning session and a hot afternoon one can land either side of it on the same tape, so it is the reading most likely to change from one session to the next.

If you race Junior, Mini, Micro or DD2, there is no preset for your engine. The analysis all works the same, but the Senior window will not fit your engine, so read the peaks against your tuner's figures.

## What to check when you come in

A Rotax routine that fits between practice sessions, in the order the fixes take time:

1. **Water peak.** The narrow window means this is the one to look at first. Adjust the tape before anything else, since it takes a session to know whether it worked.
2. **Exhaust peak, and where.** Colour the track map by EGT and hold it at the hottest point. A peak at the end of the longest straight is where you would expect it. If the air has warmed or cooled since the morning, the main jet may need to follow; our page on [EGT and water temperature](https://slicks.app/use-cases/kart-egt-and-water-temperature)covers reading the trace.
3. **Peak RPM, and where.** Same method: colour the map by RPM and check the peak is at the end of the straight, not a spike from a kerb. Choosing the sprocket from it is on the page about [kart gearing data](https://slicks.app/use-cases/kart-gearing-data).
4. **Then the lap.** The theoretical best against your best lap, and the first corner on the Time Loss page. Tap it to open Compare with the lap that lost the most there.

Write down what you change at the next import, when Slicks asks what changed on the kart: gearing in front and rear teeth, the carb setting, pressures, tires. That is how the exhaust peak and the jet that produced it end up on the same page.

## Over a Rotax race weekend

A Rotax MAX Challenge weekend is a run of short sessions: practice, then qualifying, heats and the final, each one a file. Mark each session's type when you import it, and the weekend reads in order afterwards. On the Mac, the sidebar groups sessions into race weekends, and the Laps tab charts one channel across every lap of a session, so a water temperature still climbing in the final laps of a long final is plain to see.

The Tracks tab keeps every session by circuit, with your personal best there. Next season at the same track, the setup you wrote down and the peaks it produced are where you left them.

What Slicks does not do for a Rotax: it has no preset for Junior, Mini, Micro or DD2, no custom windows, no jetting chart or weather input, and no engine-hours counter for rebuilds. It reads the data your logger recorded and nothing from the engine's own electronics.

## Slicks at a glance

- **Files:** XRK and XRZ, as AiM loggers write them, parsed on the device
- **Devices:** iPhone, iPad and Mac, one app, one library
- **Requires:** iOS 26.6, iPadOS 26.6 or macOS 26.4
- **Price:** Free on the App Store
- **Sync:** Every device you sign in on; the summary works offline

Updated 12 November 2026

## What Slicks shows

_Figure: Engine speed round lap 8 at Adria Kart, standing on the track as a fence as tall as the revs, peaking at 14,114 rpm._

### Engine

Peak RPM, exhaust and water temperatures against your engine’s window.

_Figure: Adria Kart from above with lap 8's line on it, green where it gained on lap 4 and red where it lost to it, the stretches that cost the most numbered in order._

### Where the time went

The corners that cost you the most time, ranked by loss, with the braking point and minimum speed.

_Figure: Adria Kart from above in three sectors, each in turn lifted out of the track with its time and its speed line drawn on it._

### Sectors

Every lap split into sectors against the session’s best, and the theoretical best they add up to.

## Questions

### Is Rotax Senior already set up in Slicks?

Yes. Rotax Senior is the default engine preset, so a new install checks peak RPM, exhaust temperature and water temperature against its window without any setup. You can change the engine in Pits.

### I race Junior MAX, Mini MAX or DD2\. Can I still use Slicks?

Yes, for everything except the engine verdicts. Slicks has no preset for those classes, and the Rotax Senior window will not fit them, so read your peaks against your tuner's numbers and ignore the colour.

### What water temperature should a Rotax Senior run?

Slicks checks the peak against 55 to 60 °C, the range commonly quoted for the engine. Your engine builder may want something different, and their number is the one to follow.

### Can I record which main jet I ran?

Yes. When you import a new session, tick carb under what changed and write the jet and needle setting in the carb field. It stays on the session's Setup page beside the exhaust temperature it produced.

### Can I send my engine numbers to my tuner without the file?

Yes. Share Link makes a read-only web page with the session's engine peaks, best lap, sectors, setup and notes, which anyone can open in a browser. It never includes the file, and you can stop sharing at any time.

## Read next

[Everything Slicks is for](https://slicks.app/use-cases)

- [IAME X30Read an IAME X30 session on iPhone, iPad or Mac: how close the peak RPM got to the limiter, exhaust and water against the window, and your carb notes.](https://slicks.app/use-cases/iame-x30-data-analysis)
- [EGT and water temperatureSee your kart's exhaust and water temperature peaks against the engine's window, colour the track by EGT, and log carb and radiator changes.](https://slicks.app/use-cases/kart-egt-and-water-temperature)
- [Kart gearing dataChoose a kart sprocket from the peak RPM at the end of the longest straight: see where it happened, log the teeth, and check the change worked.](https://slicks.app/use-cases/kart-gearing-data)
- [MyChron 5 data analysisRead your MyChron 5 or 5S sessions on iPhone, iPad or Mac: sectors, the corners that cost time, and peak RPM and temperatures against your engine's window.](https://slicks.app/use-cases/mychron-5-data-analysis)

![The Slicks app icon](https://slicks.app/app-icon.webp)

## Bring a session file

Download it and open one of your XRK files: your laps draw themselves the same way, on the tracks you race.

[![Download on the App Store](https://slicks.app/app-store-badge-white.svg)](https://apps.apple.com/ca/app/slicks/id6746713889?mt=12)[![Download on the App Store](https://slicks.app/app-store-badge-white.svg)](https://apps.apple.com/ca/app/slicks/id6746713889)[hello@slicks.app](mailto:hello@slicks.app)

_Figure: South Garda Karting drawn from the catalog's centreline as an empty track with a north arrow marked and no lap on it._
